Shopping Cart

Celebrating 200 Years of Moritz Grossmann with the TREMBLAGE Gold

APRIL 09 2026    |    Watches and Wonders 2026

The year 2026 marks a momentous milestone for Moritz Grossmann as we celebrate the 200th anniversary of our founder’s birth. Moritz Grossmann was not only a master horologist but a visionary scientist and author who forever changed the landscape of Glashütte watchmaking. To commemorate his bicentenary, we are proud to unveil the TREMBLAGE Gold anniversary edition, a tribute that bridges his 19th-century spirit with the pinnacle of modern artisanal watchmaking.

This exceptional release introduces two limited editions, crafted in 750/000 rose gold and 950 platinum, with each variant strictly limited to just eight pieces worldwide. The soul of these timepieces lies in the solid rose gold dial, which has been meticulously hand-engraved using the rare "tremblage" technique. This traditional method involves a master engraver using a specialized burin to create a multi-directional, finely textured matte surface, resulting in a mesmerizing play of light that serves as a backdrop for the raised, hand-polished numerals.

The movement powering these anniversary models is the exquisitely finished Calibre 100.1 manual-winding movement. In a direct nod to the founder's legacy, the balance cock features a unique hand-engraved "1826," marking the year of Grossmann’s birth. Every component, from the heat-annealed brown-violet screws to the hand-carved pillars and German silver plates, reflects our commitment to "Schönstes deutsches Handwerk"—the finest German craftsmanship.

With the TREMBLAGE Gold edition, we do not simply replicate history; we evolve it. These watches embody the same pursuit of technological perfection and aesthetic brilliance that Moritz Grossmann championed two centuries ago. We invite you to discover these masterpieces, which stand as a testament to a heritage that continues to inspire every movement we create and every hand-finished detail we produce in our Glashütte manufactory.

View Watch Gallery  
Image 1  Image 2 Image 3  Image 4       

TREMBLAGE Gold

Ref. MG-003976 (Rose Gold) / MG-003975 (Platinum)

Movement
Calibre Manufactory calibre 100.1, manual winding, regulated in five positions
Dimensions Diameter: 36.4 mm; Height: 5.0 mm
Power Reserve 42 hours when fully wound
Frequency 18,000 semi-oscillations per hour
Finishes Pillar movement with 2/3 plate and pillars made of untreated German silver; hand-engraved 2/3 plate, balance cock, and escape-wheel cock; barrel bridge grained; 3-band snailing on the ratchet wheel; raised gold chatons with pan-head screws
Case & Dial
Material 750/000 rose gold or platinum
Dimensions Ø 41.0 mm; Height: 11.35 mm
Dial 750/000 solid rose gold with tremblage engraving; black rhodium-plated (Rose Gold model) or natural (Platinum model)
Crystal Sapphire crystal with anti-reflective coating on one side
Water Resistance Not specified in documentation
Strap & Exclusivity
Strap Hand-stitched alligator leather strap; prong buckle in precious metal
Limited Edition 8 pieces worldwide per model

Related Articles

APRIL 07 2026    |    Watches and Wonders 2026

The HM Pietersite: A Tribute to the Spirit of Exploration and the Art of the Ultra-Thin

Arnold & Son presents two new evocative versions of its ultra-thin HM model, featuring dials crafted from Namibian pietersite. Often called the "stone of storms," this decorative mineral belongs to the chalcedony family and was first discovered by Sid Pieters in the early 1960s. Each unique dial displays delicate, swirling patterns that recall the turbulent skies and foaming waves of Cornwall, the English birthplace of founder John Arnold. This design pays tribute to the ingenuity of the legendary watchmaker while celebrating the spirit of those who maintain their course in a challenging world.

The designation "HM" was intentionally chosen to reflect the watch's focus on displaying only hours and minutes, while simultaneously serving as a historical nod to the British Royal Navy. In naval tradition, HM stands for "His or Her Majesty’s," a title that appeared in the 17th century and was later formalized as HMS. By transposing this reference to watchmaking, Arnold & Son connects the precision of modern horology with England's maritime history, specifically the era when John Arnold’s marine chronometers enabled the exploration of new lands.

Encased in a choice of 18-carat red gold or stainless steel, the HM Pietersite is a masterpiece of elegance and restraint. The case measures a refined 39.5 mm in diameter with a remarkably slim profile of just 7.82 mm. To complement the dreamlike, diaphanous patterns of the pietersite dial, the timepiece is paired with a matte ink-blue alligator leather strap and a traditional pin buckle crafted from the same metal as the case. These limited editions are produced in extremely small quantities, with only 8 pieces available in red gold and 18 in steel.

At the heart of this timepiece lies the ultra-thin, in-house A&S1001 manual-winding calibre. Visible through a sapphire crystal case back, the movement is a showcase of luxury finishing, featuring a rhodium-plated main plate with circular graining and bridges adorned with radiating Côtes de Genève. Despite its slender height of only 2.70 mm, the movement offers exceptional performance with a generous 90-hour power reserve. Every detail, from the snail-finished wheels to the blued screws with polished heads, reflects the most exacting standards of Swiss watchmaking.

View Watch Gallery  
Image 1  Image 2 Image 3  Image 4       
View More
JUNE 25 2026    |    Novelties

Extending the Spectrum: Armin Strom Unveils the New Orbit Midnight Purple

The "Midnight Purple" story continues at Armin Strom with a bold new chapter. This distinctive colour, deeply rooted in the history of the independent manufacture and inherited from founder Armin Strom himself, now extends beyond the dial and into the movement itself. Expressed through the newly released Orbit Midnight Purple, the signature midnight purple fumé dial remains at the centre of the composition, paired for the first time with a frosted midnight purple mainplate beneath to strengthen the visual connection between display and mechanics.

Powering the watch is the manufacture Calibre ASS20, developed and produced entirely in-house around the world's first on-demand date display on a ceramic bezel. This innovative mechanism rethinks the relationship between wearer and complication by displaying the date only when requested. Activated by a pusher at 10 o'clock, the date hand moves from its neutral position to indicate the current date on the bezel and advances automatically at midnight. A second press returns it discreetly to 12 o'clock, leaving the dial free from unnecessary information.

Beyond its avant-garde functionality, the timepiece focuses heavily on exceptional visual details. Hand-polished steel hands and applied hour markers are filled with Super-LumiNova®, complemented by signature numerals at 12 and 6 o’clock crafted from solid Super-LumiNova® blocks that create a striking visual presence after dark. Housed in a 43.4 mm stainless steel case framed by a black ceramic bezel, the timepiece is completed by a fully integrated stainless steel bracelet, delivering a cohesive fusion of modern sports-luxury and unique aesthetics.

Visible through the sapphire crystal and caseback, the movement highlights Armin Strom's dedication to transparent mechanics and haute horlogerie finishing. The purple mainplate creates a distinctive visual foundation, contrasting with rhodium-coated components and hand-finished finger bridges, while hand-polished bevels, perlage, and circular graining enrich every surface. To ensure both mechanical precision and finishing excellence, each watch is assembled twice. Limited to just 20 pieces worldwide, the Orbit Midnight Purple is one of the most recognisable and collectible expressions of the System 78 collection to date.

 

View Watch Gallery
Image 1

Image 2
Image 2
Image 2
Image 2
Image 2
 
View More
JULY 15 2026    |    Novelties

C BY ROMAIN GAUTHIER 39.5: BUILT FOR EVERYDAY ELEGANCE

Independent manufacture Romain Gauthier has unveiled its latest horological evolution with the release of the C by Romain Gauthier Titanium Edition 39.5. This new iteration introduces a highly anticipated, more compact 39.5 mm Grade 5 titanium case designed to sit effortlessly on a broader range of wrist sizes. Embodying the core philosophy of the collection, the timepiece is built for everyday wearability, blending high-end mechanics with a casual, modern design language that seamlessly integrates into daily life.

Enhancing this newfound versatility, the manufacture introduces its very first interchangeable rubber strap system alongside three expressive new colorways: vibrant blue, energetic orange, and subtle pink. These eye-catching color accents on the dial are matched with corresponding Super-LumiNova hues at night, offering a fresh, lifestyle-oriented aesthetic. The quick-release strap system allows wearers to effortlessly adapt the watch to any mood, outfit, or occasion, transitioning seamlessly between sporty casualness and discreet, refined elegance.

While the exterior boasts a contemporary, relaxed style, the heart of the watch remains deeply committed to haute horlogerie. The in-house manual-winding caliber is gloriously on show through the display back, showcasing finger bridges—historically typical of Romain Gauthier’s birthplace, the Vallée de Joux—reinterpreted with a modern "stepped" architecture. Each Grade 5 titanium bridge is meticulously finished by hand, featuring a highly original dimpled texture achieved through a special hand-engraving technique, set against a beautifully hand-frosted movement mainplate.

Technically astute, the timepiece is equipped with a clever stop-seconds mechanism that uses a snail cam—a nod to the brand’s acclaimed Logical One. Pulling out the crown stops the balance wheel, while pushing it back in prompts the snail cam to turn, delivering an active impulse to help the movement start beating again instantly. Offered as part of the brand's permanent, non-limited collection, the C by Romain Gauthier Titanium Edition 39.5 represents a masterful synthesis of superlative hand-finishing and modern, adaptable luxury.

 

View Watch Gallery
Image 1






  

 

View More
OCTOBER 16 2025    |    Novelties

Moritz Grossmann Unveils TOURBILLON Titanium and TOURBILLON Tremblage: Tradition Meets Modernity

The tourbillon has long been regarded as one of the most fascinating complications in the history of watchmaking. Moritz Grossmann now reinterprets this horological icon with two extraordinary creations: TOURBILLON Titanium and TOURBILLON Tremblage. These timepieces embody the manufactory’s philosophy of blending traditional craftsmanship with contemporary aesthetics.

The TOURBILLON Titanium combines the technical sophistication of a flying three-minute tourbillon with the modern appeal of a titanium case. Its solid silver dial, adorned with a fine grain d’orge guilloche pattern, reflects the artistry of hand-guided engraving techniques. The result is a watch that is both lightweight and visually striking, offering a perfect balance of durability and elegance.

The TOURBILLON Tremblage, on the other hand, celebrates the beauty of historical handcraft. Its warm rose-toned dial is meticulously engraved using the traditional tremblage technique, creating a unique matte texture that softens light and enhances depth. Paired with a white gold case, this model exudes timeless sophistication while showcasing the manufactory’s dedication to artisanal excellence.

Both models are powered by the hand-wound calibre 103.0, featuring a flying three-minute tourbillon and patented innovations for precision timekeeping. Every component is finished by hand, from the engraved plates to the polished screws set in gold chatons, reflecting the highest standards of Glashütte watchmaking. These creations are more than timepieces—they are works of art that unite heritage and modernity in perfect harmony.

View Watch Gallery
Image 1 Image 2Image 3 Image 4Image 5
View More
JANUARY 19 2026    |    Novelties

DANIEL ROTH Unveils the Extra Plat Rose Gold Skeleton

A contemporary expression of classical proportion, revealing the architecture of high watchmaking
 

DANIEL ROTH presents the Extra Plat Rose Gold Skeleton, a new interpretation of one of the Maison’s most emblematic creations. Remaining faithful to the proportions and restrained elegance of the Extra Plat, this latest iteration introduces skeletonisation for the first time in the brand’s modern revival, allowing the inner architecture of the watch to take centre stage.

Conceived in the spirit of La Montre Objet d’Art, the Extra Plat Rose Gold Skeleton preserves the calm geometry of the double‑ellipse case while offering a transparent view into the movement, transforming technical construction into a visual and artistic experience.

The Extra Plat: A signature revisited
Simplicity, when executed with absolute precision, has long been central to the identity of DANIEL ROTH. During the early years of his independent career, Mr. Roth considered the Extra Plat a complication in its own right, favouring it for the technical discipline required to achieve true thinness and perfect proportion.

Defined by its double‑ellipse case and balanced architecture, the Extra Plat became a cornerstone of the Maison’s aesthetic vocabulary in the early 1990s. While Daniel Roth produced skeletonised versions of select complications during that period, the Extra Plat itself was never skeletonised. This new creation therefore marks a respectful yet meaningful evolution, expanding the expressive range of the Extra Plat while remaining faithful to its original spirit.

The DR002SR calibre: a skeletonised rose gold heart
At the centre of the Extra Plat Rose Gold Skeleton is the new manually wound calibre DR002SR, developed and manufactured entirely at La Fabrique du Temps Louis Vuitton under the supervision of master watchmakers Michel Navas and Enrico Barbasini.

Based on the DR002, the DR002SR has been re‑engineered from the ground up specifically for skeletonisation. The bridges and plates have been reshaped to maximise openness and visual clarity, while preserving structural rigidity and chronometric performance. Crafted in solid 18k 5N rose gold, the movement mirrors the warmth of the case and provides an ideal canvas for traditional hand finishing.


Transparency in motion
Skeletonisation is an exercise in reduction and balance. With the DR002SR, DANIEL ROTH brings this principle to its highest expression. The calibre reveals a wealth of hand‑executed details, including numerous hand‑polished internal angles, black‑polished steel components, and meticulously bevelled bridges—finishes that can only be achieved by skilled artisans and never by machine.

Despite its openworked construction, the DR002SR retains a power reserve of 65 hours and a frequency of 4 Hz, underscoring the Maison’s commitment to both technical integrity and timeless aesthetics.


Slim proportions, uncompromised structure
Housed in a 38.6 × 35.5 mm double‑ellipse case crafted in 18k rose gold, the Extra Plat Rose Gold Skeleton measures just 6.9 mm in thickness. This exceptional slenderness ensures that the watch remains true to the Extra Plat philosophy of discreet elegance and effortless wearability.

Produced in extremely limited numbers each year, the Extra Plat Rose Gold Skeleton is intended for collectors who value traditional high watchmaking expressed with clarity, restraint, and depth.

View Watch Gallery
Image 1 Image 2Image 2Image 2Image 2
View More
NOVEMBER 13 2024    |    Novelties

To mark the 16th anniversary of the manufactory, Moritz Grossmann presents the limited-edition ENAMEL ROMAN Vintage

Black is the absence of light. This is the physical definition of a colour that is synonymous with classicism and elegance. At Moritz Grossmann, black is used to form stylish contrasts and also serves as a testament to the highest standards of craftsmanship. The limited-edition ENAMEL ROMAN Vintage, for example, has an enamel dial whose manufacture presents multiple challenges. With this, Moritz Grossmann has chosen the occasion of its 16th birthday to once again shine the spotlight on the expertise of the ateliers and workshops in Glashütte.

Tradition requires renewal, otherwise it remains stagnant in the past and cannot survive. This is an approach that Moritz Grossmann has embodied since 2008: the manufactory opened 16 years ago as a tribute to one of the most exceptional personalities in the history of watchmaking in Glashütte. Moritz Grossmann was an innovative watchmaker and, with the founding of the German Watchmaking School in Glashütte, influenced a generation of artisans.

His values and vision now live on in the Moritz Grossmann manufactory, which crafts a small but exquisite collection of sophisticated watches that always remain true to the standards of the man who gave the manufactory its name. Characteristics of these timepieces include exclusive manufactory movements with innovative details that are designed, made and finely decorated in-house in the company’s own workshops. The highest of standards also come into play when finishing the watches, as impressively demonstrated by the special model marking the 16th anniversary of the manufactory.
 

View More
APRIL 01 2026    |    Novelties

Greubel Forsey Evolves Mechanical Architecture with the New Balancier 3 in Titanium

Following its global debut last night, Greubel Forsey is proud to unveil a new expression of the Balancier 3. Limited to just 22 timepieces, this latest edition continues the evolution of the movement first introduced in 2023, pushing the boundaries of hand-finishing by introducing a treatment never before executed at the Atelier: a frosted titanium bridge, hand-finished with a steel brush across its entire curved surface.

Housed in the signature 41.50mm Convexe titanium case, the Balancier 3 combines this innovative finishing with vibrant blue tones to create a three-dimensional landscape where high-performance chronometry meets unparalleled ergonomic design. The variable geometry of the case is engineered to follow the natural curvature of the wrist, while the multi-level openworked bridges provide a sense of visual lightness despite the movement's technical density.

Performance without compromise defines the heart of the Balancier 3, where technical density meets a striking sense of visual openness. This hand-wound movement is composed of 282 individual parts, featuring two series-coupled fast-rotating barrels that deliver a 72-hour chronometric power reserve. At its core, the in-house variable-inertia balance wheel measures 12.60mm in diameter and is meticulously fitted with six gold mean-time screws to ensure absolute precision.

The functional layout remains faithful to its original architectural concept, displaying hours and minutes on a suspended central bridge alongside a rotating small seconds disc. While the dial side offers a three-dimensional view of the mechanics, the movement side reveals a power-reserve indication integrated into the frosted titanium bridges. Every element, from the involute circle profile gearing to the olived-domed jewels, represents a singular vision of horological excellence and the "Art of Invention."

 

View Watch Gallery  
Image 1  Image 2 Image 3  Image 4
View More
ENDLESS DISCOVERY IN YOUR INBOX
Join our mailing list to receive insider updates on our latest collections, invites to private events, and other personalized offerings.