Shopping Cart

Chronoswiss Unveils the Delphis Art Deco: Where 1920s Geometry Meets Modern Mechanics

APRIL 10 2026    |    Watches and Wonders 2026

Chronoswiss proudly presents the Delphis Art Deco, a striking new edition that bridges the design philosophy of the Roaring Twenties with modern mechanical watchmaking. Housed in a 42mm Grade 5 titanium case with a matte finish, this limited-edition timepiece pays homage to an era celebrated for its architectural clarity, geometric symmetry, and creative freedom. Combined with a black nubuck strap, the piece achieves a balanced, modern presence that elevates the emblematic Delphis complication first introduced in 1996.

At the center of the watch is a lasered, nickel-coated main dial featuring a subtle three-dimensional texture in a refined grey tone. The upper stage hosts the iconic Delphis display: a digital jumping hour at 12 o'clock, a sweeping retrograde minute hand, and a subdial at 6 o'clock. Highlighted in a captivating "Art-Deco Blue" lacquer over a hand-guilloché base engraved on century-old machines at Atelier Lucerne, the subdial is beautifully accented by a gold-plated minute ring that adds a warm, geometric contrast.

Beating inside is the manufacture automatic Caliber C.6004, developed in partnership with La Joux-Perret. Visible through the transparent sapphire crystal caseback, this 37-jewel movement delivers a 55-hour power reserve and features ruthenium-plated bridges decorated with Geneva stripes and a skeletonized tungsten rotor. The 17-piece solid titanium case incorporates Chronoswiss’s signature onion crown, patented Autobloc screw lugs, and a robust 10 bar (100m) water resistance rating.

Strictly limited to just 150 pieces worldwide, the Chronoswiss Delphis Art Deco is a sophisticated mechanical tribute to 1920s design reimagined for contemporary collectors. Blending heritage hand-craftsmanship with modern engineering, it represents a bold new chapter for one of the brand's most recognizable models. The Delphis Art Deco is now available for order through authorized Chronoswiss retailers and official channels.

View Watch Gallery  
Image 1  Image 2 Image 3  Image 4       

Chronoswiss Delphis Art Deco

DELPHIS ART DECO

Ref. CH-1423TM.1-GRGO

Movement
Caliber Chronoswiss Manufacture Caliber C. 6004, Automatic
Diameter 33 mm
Jewels 37
Power Reserve Approx. 55 hours
Frequency 4 Hz / 28,800 A/h (semi-oscillations)
Balance & Spring Glucydur, three-legged; Nivarox 1 balance spring
Fine Adjustment Via Excenter
Shock Protection Incabloc
Special Features Skeletonized rotor made of tungsten with ball bearing; polished armature, escape wheel, and screws; bridge with Geneva cut, ruthenium plated
Case & Exterior
Construction Solid 17-piece Titanium Grade 5 case with matte finish; cut and polished
Bezel Polished bezel with side fluted decorative ring; cambered, double anti-reflective sapphire crystal
Case Back Screwed and satin-finished case back with sapphire crystal
Crown Iconic onion crown
Dimensions Ø 42 mm; Height 14.4 mm
Water Resistance 10 bar (100 meters)
Strap Black nubuck strap; screw-down straps with patented Autobloc system
Dial & Hands
Display Digital hour at 12 o'clock, central retrograde minute, analog second at 6 o'clock
Construction 3-dimensional construction; upper level lasered with nickel-coating
Subdial Small second at 6 o'clock with hand-guilloché lacquer in Art-Deco Blue
Accents Gold-plated minute ring
Hands "Viking" pointer shape; aluminium with satinated finish and blue PVD-coating
Exclusivity Limited Edition: 150 pieces

Related Articles

APRIL 01 2025    |    Watches and Wonders 2025

Armin Strom Introduces The One Week Skeleton

The Armin Strom One Week Titanium Skeleton, an openworked masterpiece now fully skeletonized to reveal the intricate heart of its mechanics, combines striking design with precision engineering. Encased in lightweight titanium grade 5, it balances strength with comfort, providing a feeling of lightness that makes it easy to wear all week long.

The Armin Strom One Week Titanium Skeleton is a showcase of skeletonization, a technique that is rooted in Mr. Armin Strom’s philosophy and heritage. He sought to enhance depth and three-dimensionality while avoiding see-through to maintain elegance.

The 2023 One Week was already openworked by nature, but this version goes even further, removing more material to highlight the movement’s complexity. Few watches combine openworking and skeletonization at this level. The small seconds dial is skeletonized, revealing the power reserve level and the escapement wheel for a 3D mechanical animation. The mainplate and the barrels are also skeletonized enhancing aesthetics. Thanks to this skeletonization, the power reserve indicator is highlighted as well as the cone mechanism, reminiscent of ancient pocket watches. A major highlight is the case back, offering a mesmerizing view of the entire mechanism.

With a 7-day power reserve, this watch keeps time accurate for an entire week without needing winding. The hand-finished details reflect the level of craftsmanship behind its design. Limited to 100 pieces, the One Week Titanium Skeleton offers a refined, functional timepiece that blends robustness and comfort in a minimalist package.
 

View More
JULY 02 2025    |    Novelties

Greubel Forsey Unveils the Final Balancier Contemporain in Stainless Steel - A Defining Final Edition

Greubel Forsey presents the final edition of the Balancier Contemporain, marking the definitive conclusion of this iconic calibre. This timepiece is housed in a 39.6mm stainless steel case – a material that has only been used twice before in the history of the Atelier. Limited to just 33 timepieces, this edition will be built and delivered exclusively in 2025. Once complete, the Balancier Contemporain calibre will be permanently retired and will never be made again.

More than a final edition, this stainless steel interpretation is a statement of purpose – it is the rarest and most exclusive case material in the Atelier’s repertoire. Its presence here is deliberate: to honour the legacy of the Balancier Contemporain with purity, restraint, and resolve.

Compact, Yet Monumental

When it was introduced, the Balancier Contemporain redefined expectations – delivering the full Greubel Forsey experience in just 39.6mm. This final edition preserves that feat of engineering and design. Under its high-domed sapphire crystal, the gold dial reveals a rich interplay of levels, textures, and finishes. A sunburst blue hour-ring frames the composition, while a deep blue minute-circle and sectorial indications for the small seconds and power reserve create both contrast and clarity. A large visual opening draws the eye to the in-house 12.6mm balance wheel, suspended above a flat, black-polished gold plate that provides visual depth and dramatic reflection.

The movement is composed of 256 parts, each hand-finished to the highest standard. The bridges are in nickel silver, frosted and spotted by hand, with perfectly polished bevels and countersinks, straight-grained flanks, and a subtle blue treatment unique to this edition. The balance wheel bridge is flat black polished steel – one of the most demanding finishes in haute horlogerie – with hand-polished bevels that reflect light beautifully. The balance wheel itself is mounted above a flat black-polished gold plate, a surface so refined it becomes both technical and architectural.

On the movement side, a black-polished gold plate is engraved in relief with the fundamental values of Greubel Forsey – invisible to the wearer, yet finished with the same uncompromising care. Olive-domed jewels are set in gold chatons, with hand-polished countersinks that catch the light at just the right angle. Every component, visible or not, is treated with the same reverence – as if each part could stand on its own as a miniature work of art.

A Closing Statement – and a New Beginning

This is the last timepiece to carry the Balancier Contemporain calibre – but it is also the first to signal a new direction. With this final edition, Greubel Forsey opens a new chapter focused on small-diameter timepieces. Over the coming years, this creative momentum will continue to build, exploring new dimensions of mechanical expression, proportion, and elegance – all without compromise.

The Balancier Contemporain in stainless steel is a definitive conclusion – and a confident beginning.
 

View Watch Gallery
Image 1 Image 2Image 3 Image 4  
View More
OCTOBER 17 2025    |    Novelties

Armin Strom Unveils Mirrored Force Resonance Zeitgeist 1665 – A Tribute to Horological History

Armin Strom unveils the Mirrored Force Resonance Zeitgeist 1665, a creative interpretation of what a Resonance wristwatch might have looked like centuries ago. This timepiece combines historical horology with modern innovation, celebrating the brand’s milestone achievement of stable and resilient Resonance.

The Zeitgeist features a stainless steel case measuring 43 mm in diameter, paired with an 18K white gold dial in an off-center design. Inside beats the Armin Strom Manufacture Caliber ARF21_ZG, a manual-winding movement with twin-seconds and flyback functionality, offering an impressive 80-hour power reserve. Limited to just 25 pieces worldwide, this exceptional creation pays tribute to the centuries-long pursuit of chronometric consistency, a challenge first explored by Christiaan Huygens in 1665. Armin Strom solved the Resonance Fragility Problem in 2016, making this phenomenon practical for wristwatches.

 

View Watch Gallery
Image 1   
View More
JUNE 25 2024    |    Novelties

Back in sleek anthracite: Armin Strom unveils the One Week Manufacture Edition

Biel/Bienne, Switzerland, 26 June 2024: Following the inaugural redesigned One Week First Edition that made its debut in 2023, Armin Strom unveils a new version of the successor to its first-ever manufacture movement with the One Week Manufacture Edition. The highly architectural openworked movement, housed in a sleek and sporty steel case with an integrated bracelet, is now presented in a range of grey and anthracite hues. Limited to 100 pieces, the One Week Manufacture Edition foregoes colour to bring out the beauty of its uniquely constructed manual calibre.

15 years ago, independent watchmaking brand Armin Strom took a major leap that would forever change its trajectory. Realising that the path to true independence lies in mastering every step of the process, it established its very own manufacture in Biel. A year later, the first timepiece produced by its vertically integrated manufacture was unveiled: the One Week. Entirely developed and manufactured in-house and designed with symmetrical harmony in mind, it stood out thanks to its unique movement architecture featuring two barrels that together provide a seven-day power reserve. This milestone marked the beginning of many new calibres and innovations by the Armin Strom manufacture, showcasing their dedication to the science of movement and garnering the admiration and respect of even the most discerning and seasoned collectors.

The new One Week Manufacture Edition completely reimagines this milestone calibre in line with the brand’s recent bolder, more three-dimensional approach to calibre design, all in a sleek and serene execution that further highlights its ingenuity and uniqueness. The mainplate, bridges and parts, visible on the dial thanks to the openworked movement design, are anthracite PVD coated for a striking look.

As Armin Strom founder Serge Michel notes: “Collectors who missed the opportunity to get a first edition of the redesigned One Week will now have another chance. The Manufacture Edition of the new One Week will be limited to 100 pieces.”

Sporty yet classy, this model exudes calmness and serenity with its anthracite tones and the symmetrical harmony of its in-house movement.

View More
AUGUST 11 2026    |    Novelties

Moritz Grossmann Announces the TEFNUT 36 Silver-Plated by Friction Turquoise Blue

oritz Grossmann celebrates the 200th birthday of its founder with the launch of the TEFNUT 36 Silver-Plated by Friction Turquoise Blue, a timepiece limited to just 12 pieces worldwide. This special anniversary edition combines traditional 19th-century craftsmanship with a modern aesthetic, paying homage to the visionary watchmaker, scientist, and founder of the German Watchmaking School. The manufactory in Glashütte continues to honor this rich heritage by blending historical techniques with contemporary design.

The dial of the watch is crafted using a meticulous silver-plating by friction technique, also known as silver-plating by grit, which is executed entirely by hand through multiple complex steps involving silver powder, salt, tartar, and water. This traditional process imparts a velvety, matte structure with remarkable optical depth, further enhanced by a unique green-tinged blue hue that shifts dynamically depending on the angle and lighting. Contrasting the textured surface are engraved Roman numerals lacquered in blue, alongside the historic 1875 'M. Grossmann' logo, scale markers, and manually crafted steel hands annealed to a vibrant blue hue.

Housed in a slender and expressive 36-millimeter stainless steel case with a flat profile, the watch is designed to offer exceptional comfort and elegance on any wrist. It is complemented by a hand-stitched grey kudu leather strap featuring a pin buckle in stainless steel. Inside ticks the manufacture calibre 102.1, a hand-wound mechanical movement measuring just 3.45 millimeters in thickness, featuring a pillar movement architecture, a three-fifths plate, a stepped balance cock with a Grossmann micrometer screw, and a special '1826' anniversary engraving.

 

View Watch Gallery
Image 1










  

 

View More
ENDLESS DISCOVERY IN YOUR INBOX
Join our mailing list to receive insider updates on our latest collections, invites to private events, and other personalized offerings.