Greubel Forsey introduces the final and most exclusive editions of the Balancier Convexe S²: one in black ceramic with 5N red gold, and one in white ceramic, each strictly limited to 11 pieces.
These editions conclude a calibre developed through five years of mechanical and architectural exploration, with production set to cease permanently in 2026.

The Convexe case (41.5 mm) and movement were conceived as a single architectural whole, integrating Greubel Forsey’s signature 30° inclined balance wheel system as the visual and chronometric centre. The openworked movement features 301 components, including a 68‑part escapement platform, and is powered by two rapid-rotation coaxial barrels delivering a 72‑hour chronometric reserve.

Finishing remains uncompromising: frosted titanium bridges, polished bevels, hand‑finished countersinks, and meticulous transitions — even on invisible components.

Two Final Interpretations
Black Ceramic & 5N Red Gold
A dramatic contrast of dark architecture framed by ceramic, with red gold adding warmth and sculptural depth.The interplay of matte and polished surfaces enhances the piece’s three‑dimensional form

White Ceramic
A purist, graphic expression that highlights the structural geometry of the movement through light and shadow.The monochromatic case offers clarity, openness and a distinctly technical aesthetic.

Both editions preserve the characteristic S² display: suspended hours/minutes bridge, small seconds, and sector power‑reserve indication beneath a curved sapphire crystal.

This launch marks the concluding chapter of the Balancier Convexe S²’s five‑year evolution — not an iteration, but a final statement. As of 2026, Greubel Forsey will begin a gradual shift toward an almost entirely new collection, retiring earlier calibres with intention and ceremony rather than quiet discontinuation.
 

View Watch Gallery

 

           

Armin Strom has masterfully fused its revolutionary resonance technology with a bold, contemporary aesthetic in the new Mirrored Force Resonance Red. Limited to just 15 pieces worldwide, this rare masterpiece introduces a striking off-centre guilloché dial in vibrant red. By pairing traditional hand-crafted artistry with the brand’s signature open-worked design, this timepiece breathes dynamic new energy into Armin Strom's celebrated dual-balance mechanism, creating a captivating dialogue between classic hand-finishing and cutting-edge mechanical architecture.

The brilliant red dial is hand-crafted on a traditional, manually operated rose engine lathe, engraving a radiating pattern that catches and plays with light in captivating reflections. Encircled by black azuré (蝸形紋) chapter rings and topped with faceted, floating index markers, the dial's layout creates a stark, three-dimensional contrast that maximizes both visual depth and legibility. Housed in a polished 43 mm stainless steel case, the movement's technical architecture is framed by anthracite-coated bridges and paired with a dark grey Alcantara strap—ensuring that the vibrant red dial and the synchronized dance of the resonance mechanism remain the undisputed center of attention.

At the heart of this technical marvel lies the in-house Calibre ARF21, a hand-wound movement that integrates two completely independent movements within a single calibre. Connected via Armin Strom's patented Resonance Clutch, the two opposing balance wheels transfer vibrations to enter and maintain a perfect state of harmonic resonance. This physical synchronization significantly improves chronometric stability and rate consistency over time. To let wearers witness this horological phenomenon in action, a pusher at 2 o'clock activates a flyback mechanism, resetting both independent seconds hands to zero simultaneously so their perfect synchrony can be monitored in real-time.

Every millimeter of the Mirrored Force Resonance Red showcases Armin Strom's uncompromising dedication to haute horology standards, featuring meticulous hand-polished bevels, perlage, circular graining, and mirror-black polished screws. On the reverse side, the main plate features technical inscriptions rendered in three-dimensional relief, rising directly from the metal's surface. As is tradition for the Swiss manufacture, each watch is assembled twice to guarantee absolute precision. For collectors seeking the pinnacle of independent Swiss watchmaking, this 15-piece limited edition represents a perfect harmony of mechanical science and artistic expression.
 

View Watch Gallery

  

Greubel Forsey presents the final edition of the Balancier Contemporain, marking the definitive conclusion of this iconic calibre. This timepiece is housed in a 39.6mm stainless steel case – a material that has only been used twice before in the history of the Atelier. Limited to just 33 timepieces, this edition will be built and delivered exclusively in 2025. Once complete, the Balancier Contemporain calibre will be permanently retired and will never be made again.

More than a final edition, this stainless steel interpretation is a statement of purpose – it is the rarest and most exclusive case material in the Atelier’s repertoire. Its presence here is deliberate: to honour the legacy of the Balancier Contemporain with purity, restraint, and resolve.

Compact, Yet Monumental

When it was introduced, the Balancier Contemporain redefined expectations – delivering the full Greubel Forsey experience in just 39.6mm. This final edition preserves that feat of engineering and design. Under its high-domed sapphire crystal, the gold dial reveals a rich interplay of levels, textures, and finishes. A sunburst blue hour-ring frames the composition, while a deep blue minute-circle and sectorial indications for the small seconds and power reserve create both contrast and clarity. A large visual opening draws the eye to the in-house 12.6mm balance wheel, suspended above a flat, black-polished gold plate that provides visual depth and dramatic reflection.

The movement is composed of 256 parts, each hand-finished to the highest standard. The bridges are in nickel silver, frosted and spotted by hand, with perfectly polished bevels and countersinks, straight-grained flanks, and a subtle blue treatment unique to this edition. The balance wheel bridge is flat black polished steel – one of the most demanding finishes in haute horlogerie – with hand-polished bevels that reflect light beautifully. The balance wheel itself is mounted above a flat black-polished gold plate, a surface so refined it becomes both technical and architectural.

On the movement side, a black-polished gold plate is engraved in relief with the fundamental values of Greubel Forsey – invisible to the wearer, yet finished with the same uncompromising care. Olive-domed jewels are set in gold chatons, with hand-polished countersinks that catch the light at just the right angle. Every component, visible or not, is treated with the same reverence – as if each part could stand on its own as a miniature work of art.

A Closing Statement – and a New Beginning

This is the last timepiece to carry the Balancier Contemporain calibre – but it is also the first to signal a new direction. With this final edition, Greubel Forsey opens a new chapter focused on small-diameter timepieces. Over the coming years, this creative momentum will continue to build, exploring new dimensions of mechanical expression, proportion, and elegance – all without compromise.

The Balancier Contemporain in stainless steel is a definitive conclusion – and a confident beginning.
 

View Watch Gallery

 

Independent manufacture Romain Gauthier illuminates its modern horological vision with the unveiling of the C by Romain Gauthier Titanium Edition Bracelet Lumen dial (Ref. MON00585). For the very first time, the brand integrates a full Super-Luminova dial into its celebrated Freedom collection, using light itself as a core design material. Deliberately paired with the C by Romain Gauthier Titanium Edition Bracelet—available for the first time in a limited edition of just 28 pieces—this creation redefines nocturnal legibility with ergonomic, everyday titanium luxury.

By day, the timepiece displays a refined, crisp white aesthetic anchored by sharp Grade 5 titanium numerals, indices, and hands. When darkness falls, the entire watch face transforms into a brilliant blue glow, creating a striking contrast that ensures effortless readability in any lighting condition. The integrated Grade 5 titanium bracelet—meticulously finished with alternating satin-brushed and hand-polished facets—flows seamlessly from the 41mm x 9.55mm case (47.8mm lug-to-lug), providing lightweight comfort and an uninterrupted, architectural silhouette.

Beneath the luminous dial lies an uncompromising expression of high-end Swiss watchmaking. Visible through the sapphire display back, the in-house hand-wound calibre crafted in natural Grade 5 titanium showcases Romain Gauthier’s heritage from the Vallée de Joux through modern "stepped" finger bridges. Each bridge is meticulously decorated with an exclusive hand-engraved dimpled texture, standing out against a hand-frosted movement mainplate while delivering a robust 60-hour power reserve.

Technical precision remains central to the manufacture's DNA, highlighted by the inclusion of a clever stop-seconds mechanism driven by a snail cam—a signature innovation inspired by the acclaimed Logical One. Pulling the off-center crown halts the balance wheel, while pushing it back in triggers the snail cam to deliver a subtle physical impulse, ensuring the movement restarts instantly. Strictly limited to 28 pieces worldwide, the C by Romain Gauthier Titanium Edition Bracelet Lumen dial represents an extraordinary convergence of glowing nighttime drama and superlative independent watchmaking.
 

View Watch Gallery

  

Arnold & Son unveils the final chapter of its Constant Force 11 collection with the Constant Force Tourbillon 11 Platinum Edition, a limited series of just 11 pieces. This exceptional timepiece celebrates 260 years of horological heritage, paying homage to the legendary friendship between John Arnold and Abraham-Louis Breguet.

Crafted in platinum (Pt950), the 41.5 mm case houses a dial of hand-guilloché tremblé engraving in 18K yellow gold, inspired by the fern-covered moors of Tintagel, Cornwall—Arnold’s birthplace and the mythical land of King Arthur. The white opal subdial and visible constant force mechanism add depth and elegance.

Powered by the A&S5219 manual winding calibre, the watch features a constant force mechanism, one-minute tourbillon, and true-beat seconds. The engraved plate reads: "To the revered memory of John Arnold and Abraham-Louis Breguet. Friends in their time, legendary watchmakers always."

View Watch Gallery